Bosch 0280150153 Lucas 73179A Compatible Jaguar 4.2 Hose To Rail Service Kit 6 Cylinder - Kit 136

This kit has been designed for the following injectors with hose to rail fitting:

Bosch 0280150153 & Lucas 73179A.

This is for 6 cylinder engines with a ferrule fitting to the injector and a clip fitting to the fuel rail.

These injectors were fitted to Jaguar 4.2 series for a very short time, please make sure the numbers quoted are the ones appearing on your injectors.

Contents

Seal Kit 136 contains:

6 x Aramid hose pieces cut to 90mm in length

6 x Hose clips

6 x Injector ferrules

6 x Filter baskets

6 x Pintle caps long type

6 x Inlet manifold seals

We also include our instruction sheets with each hose kit order, carefully put together to help you with the task.

Terms

THE PICTURE OF THE INJECTORS IS FOR IDENTIFICATION ONLY TO HELP YOU CHOOSE THE RIGHT KIT, IT IS NOT INCLUDED IN THE SALE.

This hose is expensive, but it is the right hose to use now with rising ethanol levels in UK and international fuels. As hoses age they become rock hard, which can lead to splitting, leaking and unfortunately even fires. Don't compromise your engine by replacing the older polyester reinforced hose with more of the same, Aramid is the only hose that should be used for this. When replacing your injector hoses please remember to also check your feed/return pipes at the same time.

All parts equal to or exceed original specification of what was installed on your injectors at manufacture in function and material. The hoses, clips and ferrules have been matched perfectly, all seals are Viton, all filters are matched to the injectors and are NOT universal as others are selling. All parts tried, tested and manufactured for Mr Injector UK.