Overhaul Kit For Jaguar XJ XJS 5.3 V12 HE & Daimler Double Six With Bosch 0280150161 Lucas 73303A - Kit 180

The original overhaul kit for the Jaguar XJ/XJS 5.3 V12 — developed exclusively by Mr Injector UK in 2017.

We are the primary manufacturer.

Buy direct from the source.

This is our complete overhaul kit for your Jaguar XJ XJS 5.3 V12 HE / Daimler Double Six fitted with injectors:

Bosch 0280150161, 0280150162, 0280150163, 0280150164,

Lucas 73303A, EAC7874 or EAC7875.

Note: these injectors have ferrules at both ends — 10 short hoses and 2 longer hoses for the front injectors.

⚠️ Why You Must Replace Your Old Fuel Hoses Now

UK fuel now contains up to 10% ethanol. Older polyester-reinforced hoses are not ethanol-resistant — they degrade from the inside out, becoming brittle and prone to cracking. A leaking fuel hose near a hot engine is a fire risk.

Don’t just replace the injector hoses — check and replace all hoses from the tank to the feed and return lines.

Specialist-grade components engineered specifically for this application — everything you need to refurbish your injectors at home. Our Aramid hose is 100% ethanol proof and aerospace-grade.

Unlike generic kits that leave you to measure and cut hose pieces at home, every hose in this kit is pre-cut in-house to the exact length required for the injectors stated — engineered to fit, not adapted to fit.

Kit 180 is a smaller version of our Kit 131 — the same precision components and hose quality, without the additional hose and clips. If you'd also like to replace your feed and return lines, consider Kit 131 instead.

ℹ️ Not sure if this is the right kit for your injectors? Email us your injector serial numbers before ordering and we'll confirm compatibility. We'd rather you get the right kit than the wrong one.

Contents

Kit 180 contains:

10 x Short sections of ethanol-resistant hose, pre-cut to exact length

2 x Long sections of ethanol-resistant hose, pre-cut to exact length (front injectors)

24 x Hose ferrules

12 x Pintle caps

12 x Inlet manifold seals

12 x Filter baskets

12 x Mid-body clamping rubbers

Step-by-step illustrated instruction sheets developed from hands-on V12 servicing experience.

Terms

If your injectors require a service, please visit the link below for our Jaguar V12 historic rail and injector service: Jaguar V12 HE Full Injector Service & Rebuild Onto Rail

About the Hose Included in This Kit

All Mr Injector UK kits use Cohline aramid-braided fuel hose — the same hose used in aerospace and aviation applications.

· Construction: FPM inner tube, ECO rubber intermediate layer, braided aramid fibre reinforcement, ECO rubber outer cover

· Working pressure: 10 bar | Bursting pressure: 50 bar

· Temperature: -40°C to +125°C (up to +150°C for short periods)

· Meets multiple international standards: DIN 73379-B1, SAE J30R9, BMW GS 93010, DBL 6256.70, GME 08 007, VW TL 524 24 — providing superior resistance to degradation and fuel permeation compared to standard hoses

· 100% ethanol resistant — suitable for E10 fuel, bio-diesel (RME), and all commercially available fuels

· Classic vehicle compatible

All kits and parts orders dispatched by Master Injector UK.